Home › Drivetrain › 8HP51 (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL COOLER
RM3650E _52 Drivetrain _079902 8HP51 AUTOMATIC TRANSMISSION / TRANSAXLE _0387751 OIL COOLER A

8HP51 AUTOMATIC TRANSMISSION / TRANSAXLE  OIL COOLER  REMOVAL  


PROCEDURE

Hide 51410 1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 53896B 2.REMOVE FRONT FENDER SPLASH FRONT SHIELD LH

Hide 53895B 3.REMOVE FRONT FENDER SPLASH FRONT SHIELD RH

HINT:

Use the same procedure as for the LH side.


Hide 52119A 5.REMOVE FRONT BUMPER

Hide 33493A 6.REMOVE TRANSMISSION OIL COOLER

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




HINT:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.


a.
C413373

Unlock oil cooler tubes (1) and disconnect.

HINT:

Drain, catch and dispose of the automatic transmission fluid.



b.

Thread transmission oil cooler (3) in direction of arrow out of the holders (2).


c.
C413374

Thread out transmission oil cooler (1) in direction of arrow through the opening in the front air duct (2) and remove.