Airbag unit.
Danger! Life-threatening injuries!
All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION
A wheel alignment is not necessary after the removal, installation or replacement.
45130
1.REMOVE HORN BUTTON ASSEMBLY
84610F
2.REMOVE TRANSMISSION SHIFT SWITCH ASSEMBLY
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
Unlock plug connection (1) and disconnect.
Loosen the T20 bolt (2).
Thread the transmission shift switch assembly (1) out of the steering wheel (2).