Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM3650E _58 Vehicle Interior _079892 THEFT DETERRENT / KEYLESS ENTRY _0387778 ENGINE HOOD COURTESY SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 53510 1.INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

a.
E417978C01
0,0 0,0 false
V113147

Install in this Direction


Attach the cable (2) to the engine hood courtesy switch (hood lock assembly) (1).


b.

Install the engine hood courtesy switch (hood lock assembly) (1) in the downward direction.


c.
E415803

Replace the T30 screws (2).


d.

Tighten the T30 screws (2).

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


e.

Attach the clamp (1).


f.

w/ Pop Up Hood:

i.
E415802

Connect the connectors (2).


ii.

Attach the clamps (1).



g.

w/o Pop Up Hood:

i.
E416621

Connect the connector (2).


ii.

Attach the clamps (1).



h.

Attach the No. 5 water by-pass hose to the radiator reserve tank assembly.


Hide 53826A 2.INSTALL UPPER FRONT FENDER PROTECTOR LH

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL