Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
87211
2.REMOVE NO. 1 AIR DUCT
84340
3.REMOVE STOP LIGHT SWITCH ASSEMBLY
Disconnect the connector (1).
Operate and hold brake pedal.
Pull the stop light switch assembly (2) out of the holder (3) for the stop light switch assembly.
Press the claw (4) together and unclip the holder (3) for the stop light switch assembly from the brake pedal.