48829A
1.INSTALL FRONT NO. 1 STABILIZER BRACKET LH
Mount the front No. 1 stabilizer bracket LH on the front stabilizer bar.
48824A
2.INSTALL FRONT NO. 1 STABILIZER BRACKET RH
Use the same procedure as for the LH side.
48811
3.INSTALL FRONT STABILIZER BAR
Guide in the front stabilizer bar (2).
Replace nuts (1).
Tighten nuts (1).
48810
4.INSTALL FRONT STABILIZER LINK ASSEMBLY LH
Position the front stabilizer link assembly LH (2) on the front stabilizer bar and front shock absorber assembly.
Replace the 16 mm nuts (1).
Tighten the 16 mm nuts (1) and use the T30 "TORX" socket wrench for counter support as needed.
48820B
5.INSTALL FRONT STABILIZER LINK ASSEMBLY RH
Use the same procedure as for the LH side.
51219
6.INSTALL FRONT SUSPENSION MEMBER LOWER PROTECTOR
7.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT