Home › Suspension › REAR SUSPENSION › REAR STRUT BAR
RM3650E _53 Suspension _079981 REAR SUSPENSION _0387950 REAR STRUT BAR A

REAR SUSPENSION  REAR STRUT BAR  REMOVAL  


PROCEDURE

Hide 64330D 1.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

Hide 62480A 2.REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

Hide 62470A 3.REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64288D 4.SEPARATE TRANSVERSE PIPE TRIM

a.
A444636C01
0,0 0,0 false

Using a molding remover B, detach the claws (2) and separate the transverse pipe trim (1).

HINT:

Use the same procedure for both sides.



Hide 62609 5.REMOVE SEAT BELT HOLE COVER SUB-ASSEMBLY LH

Hide 62608 6.REMOVE SEAT BELT HOLE COVER SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64277L 7.REMOVE TRANSVERSE PIPE

a.
A442514

Loosen T50 bolts (1).


b.

Slide out the transverse pipe (2) to the top under the trim panels of the deck side trim cover.


Hide 64288D 8.REMOVE TRANSVERSE PIPE TRIM

a.

Remove the transverse pipe trim from the transverse pipe.

HINT:

Use the same procedure for both sides.