Home › Engine / Hybrid System › B58 (INTAKE / EXHAUST) › OUTLET TURBO OIL PIPE
RM3650E _51 Engine / Hybrid System _080024 B58 INTAKE / EXHAUST _0388149 OUTLET TURBO OIL PIPE A

B58 INTAKE / EXHAUST  OUTLET TURBO OIL PIPE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot fluids.

Risk of scalding!

-

Conduct all work in the vehicle wearing appropriate personal protective equipment only.


·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




NOTICE:
·

Damage to spiral cable sub-assembly.

The spiral cable sub-assembly or the coil spring cassette can be damaged by twisting the steering wheel if the universal joint is disconnected from the steering gear or the steering shaft below or when the steering shaft is disconnected from the steering column below.

-

Secure steering wheel from twisting.




HINT:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 2.REMOVE STEERING LINK ASSEMBLY

Hide 15474 3.REMOVE OUTLET TURBO OIL PIPE

CAUTION:
·

Hot fluids.

Risk of scalding!

-

Conduct all work in the vehicle wearing appropriate personal protective equipment only.




a.
A441897

Loosen the T30 bolts (1) and (2).

HINT:

Collect and dispose of emerging fluids. Observe country specific waste disposal regulations.



b.

Remove the outlet turbo oil pipe (3).