Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › KNOCK SENSOR (for Bank 1)
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388312 KNOCK SENSOR(for Bank 1) A

B48 ENGINE CONTROL  KNOCK SENSOR(for Bank 1)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.




PROCEDURE

Hide 27020 1.REMOVE GENERATOR ASSEMBLY

Hide 89615 2.REMOVE KNOCK SENSOR

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442126

Unlock and loosen connector (1).


b.

Loosen E10 bolt (2).


c.

Remove the knock sensor (3).