Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › THROTTLE BODY
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388322 THROTTLE BODY A

B48 ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 17882 1.REMOVE NO. 2 AIR CLEANER HOSE

Hide 22030 2.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442122

Loosen E10 bolt (1).


b.

Remove screws (arrows).


c.

Remove the throttle body with motor assembly (2).


d.

Unlock and loosen connector (3).