Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388324 INTAKE AIR TEMPERATURE SENSOR A

B48 ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89424G 2.REMOVE INTAKE AIR TEMPERATURE SENSOR

a.
A442213

Unlock plug connection (1) and disconnect.


b.

Using a 17 mm deep socket wrench, Unscrew the intake air temperature sensor (2).


c.

Remove the intake air temperature sensor (2).