12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
89421R
2.REMOVE AIR PRESSURE SENSOR
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Electrostatic discharge.
Damage to or destruction of electrical components.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Unlock plug connection (1) and disconnect.
Loosen T25 screw (2).
Remove air pressure sensor (3).