15370J
1.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
Position the cam timing oil control solenoid assemblies at the cylinder head cover.
The figure shows the rear side of the engine.
Position each SST correctly on the cam timing oil control solenoid assembly.
Using SST, turn the cam timing oil control solenoid assembly on the exhaust camshaft adjuster (1) in the direction of the arrow until the limit positions rest against the clamps.
Using SST, turn the cam timing oil control solenoid assembly on the intake adjuster (1) in the direction of the arrow until the limit positions rest against the clamps.
Connect both connectors (1) to the cam timing oil control solenoid assemblies and route the cable correctly.
The figure shows the rear side of the engine.
12611
2.INSTALL NO. 1 ENGINE COVER
12601B
3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
55789B
4.INSTALL NO. 2 COWL TOP VENTILATOR LOUVER PROTECTOR
55788A
5.INSTALL COWL TOP VENTILATOR LOUVER PROTECTOR
53681
6.INSTALL UPPER FRONT SUSPENSION CENTER BRACE