Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388356 ENGINE OIL TEMPERATURE SENSOR A

B58 ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.




NOTICE:
·

Damage to battery terminal, the safety battery terminal or the battery state sensor.

Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.

-

Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.




PROCEDURE

Hide 89429 2.REMOVE OIL TEMPERATURE SENSOR

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442252

Unlock plug connection (1) and disconnect.


b.

Loosen T30 bolt (2).


c.
A442253

Guide out and remove oil temperature sensor (1).

HINT:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.