12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
89424G
2.REMOVE INTAKE AIR TEMPERATURE SENSOR
Electrostatic discharge.
Damage to or destruction of electrical components.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Unlock plug connection (1) and disconnect.
Using a 17 mm deep socket wrench, unscrew the intake air temperature sensor (2) with the special tool 0 496 142 (11 8 850).
Take out and remove intake air temperature sensor (2).