Home › General › MAINTENANCE › B58 SPARK PLUG
RM3650E _V1 General _079881 MAINTENANCE _0388368 B58 SPARK PLUG A

MAINTENANCE  B58 SPARK PLUG  INSTALLATION  


PROCEDURE

Hide 1.INSTALL SPARK PLUG

a.

Using a 14 mm spark plug wrench, install the spark plugs to the cylinder head sub-assembly.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)

NOTICE:
·

Do not drop spark plug into spark plug shaft!

-

This can lead to a reduction of the electrode gap and can thus impair smooth running of the engine, especially in idle position.




HINT:

Exclusively swivelling extensions may be used for the reversible ratchet. Rigid mounting tool and variable plug connections with rigid option may not be used; there is a risk that the insulator breaks.



Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY