Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
15671
1.REMOVE OIL FILTER BRACKET
89637C
2.REMOVE OIL PRESSURE SENSOR
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Electrostatic discharge.
Damage to or destruction of electrical components.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Unlock plug connection (1) and disconnect.
Using a 24 mm deep socket wrench, detach and remove the oil pressure sensor (1).
Catch and dispose of emerging engine oil.