Home › Engine / Hybrid System › B58 (LUBRICATION) › OIL PRESSURE SENSOR
RM3650E _51 Engine / Hybrid System _080066 B58 LUBRICATION _0388389 OIL PRESSURE SENSOR A

B58 LUBRICATION  OIL PRESSURE SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.

-

For an auxiliary battery: Disconnect battery earth lead of auxiliary battery.




PROCEDURE

Hide 89637C 2.REMOVE OIL PRESSURE SENSOR

CAUTION:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.


NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442158

Unlock plug connection (1) and disconnect.


b.
A442159

Using a 24 mm deep socket wrench, detach and remove the oil pressure sensor (1).


c.

Catch and dispose of emerging engine oil.