23801P
1.INSTALL NO. 1 FUEL PIPE SUB-ASSEMBLY
Thread in and install the No. 1 fuel pipe sub-assembly (2).
Tighten union nut (1) hand tight.
Tighten the union nuts (1) with the 17 mm union nut wrench.
Guide in and install cover (1).
2.INSTALL IGNITION COIL ASSEMBLY
11272
3.INSTALL NO. 2 CYLINDER BLOCK SIDE COVER
12601B
4.INSTALL NO.1 ENGINE COVER SUB-ASSEMBLY
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL