Electrostatic discharge.
Damage to or destruction of electrical components.
Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Anti static work clothing and antistatic shoes (with ESD symbol).
For additional information see: 61 35 Information on electrostatic discharge (ESD) protection.
64330D
1.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
64711B
2.REMOVE DECK BOARD ASSEMBLY
89571
3.REMOVE FUEL PUMP CONTROL ECM
Unlock plug connection (1) and disconnect.
Loosen nut (2).
Remove the fuel pump control ECM (3).