Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
17882
1.REMOVE NO. 2 AIR CLEANER HOSE
51219
2.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR
3. DRAIN ENGINE COOLANT (for High Temperature)
4.REMOVE FAN AND GENERATOR V BELT
16100
5.REMOVE ENGINE WATER PUMP ASSEMBLY
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Loosen T30 bolts (2).
Pull the No. 2 water by-pass hose (1) out of the engine water pump assembly and set aside.
Unlock the lock (3).
Detach the No. 1 radiator hose (4) and set it aside.
Loosen T30 bolts (1).
Pull the engine water pump assembly (2) out of the water inlet with water pump housing sub-assembly and remove to the top.
16321
6.REMOVE WATER INLET
Loosen T30 bolt (1).
Remove water inlet (2).