Home › Engine / Hybrid System › B58 (COOLING) › ELECTRIC WATER PUMP (for Turbo)
RM3650E _51 Engine / Hybrid System _080128 B58 COOLING _0388821 ELECTRIC WATER PUMP(for Turbo) A

B58 COOLING  ELECTRIC WATER PUMP(for Turbo)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot fluids.

Risk of scalding!

-

Conduct all work in the vehicle wearing appropriate personal protective equipment only.



·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




NOTICE:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.


PROCEDURE

Hide 12611 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 51219 2.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR

Hide 3. DRAIN ENGINE COOLANT (for High Temperature)

Hide 16020 4.REMOVE WATER PUMP ASSEMBLY

NOTICE:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.


a.
A441887

Unlock and disconnect the No. 3 radiator hose and No. 2 turbo water pipe sub-assembly (1).


b.

Unlock plug connection (2) and disconnect.


c.

Loosen nut (3).


d.
A441888

Guide the No. 2 water pump bracket sub-assembly (1) out and remove.


e.

Remove water pump assembly (2).