16264
1.INSTALL NO. 2 WATER BY-PASS HOSE
Check the O-rings (1) and (2) on the No. 2 water by-pass hose (3) for damage and replace where required.
Position the No. 2 water by-pass hose (3) between the cylinder head and the engine water pump assembly.
Tighten down T30 bolts (1) and (2).
17882
2.INSTALL NO. 2 AIR CLEANER HOSE
3.ADD ENGINE COOLANT (for High Temperature)
4.INSPECT FOR COOLANT LEAK (for High Temperature)
51219
5.INSTALL FRONT SUSPENSION MEMBER LOWER PROTECTOR