67751
1.REMOVE BACK DOOR TRIM BOARD
2.REMOVE MULTIPLE-BAND AERIAL
Electrostatic discharge.
Damage to or destruction of electrical components.
Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Antistatic work clothing and antistatic shoes (with ESD symbol).
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
for Toyota Supra Connect:
Unlock plug connections (1) and disconnect.
Loosen T20 screws (2).
Remove the multiple-band aerial (3).
for Navigation System:
Use the same procedure as for Toyota Supra Connect.