Home › Vehicle Interior › SEAT › LUMBAR SWITCH
RM3650E _58 Vehicle Interior _080097 SEAT _0393959 LUMBAR SWITCH A

SEAT  LUMBAR SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the driver side and front passenger side.

·

The procedure listed below is for the driver side.



PROCEDURE

Hide 84920P 1.INSTALL FRONT LUMBAR SUPPORT POWER SEAT SWITCH

a.
B541211

Attach the claws (1) to install the front lumbar support power seat switch (2) to the front seat cushion shield (3).

NOTICE:

Check the attaching sound of the claws (1).



Hide 71812D 2.INSTALL FRONT SEAT CUSHION SHIELD

Hide 72495 3.INSTALL VERTICAL ADJUSTING HANDLE

Hide 4.INSTALL NO. 2 RECLINING ADJUSTER RELEASE ARM

Hide 71822 5.INSTALL FRONT SEAT SIDE SHIELD