Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the driver side and front passenger side.
The procedure listed below is for the driver side.
84920N
1.INSTALL FRONT SEATBACK SUPPORT POWER SEAT SWITCH
Attach the claws (1) to install the front seatback support power seat switch (2) to the front seat cushion shield (3).
Check the attaching sound of the claws (1).
71812D
2.INSTALL FRONT SEAT CUSHION SHIELD
72495
3.INSTALL VERTICAL ADJUSTING HANDLE
4.INSTALL NO. 2 RECLINING ADJUSTER RELEASE ARM
71822
5.INSTALL FRONT SEAT SIDE SHIELD
6.INSTALL FRONT SEAT ASSEMBLY