12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
23285A
2.REMOVE NO. 1 CHECK VALVE
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Electrostatic discharge.
Damage to or destruction of electrical components.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Unlock and disconnect the tank ventilation lines (1).
Unlock and loosen connector (2).
Remove the No. 1 check valve (4) from the holder (3).