Home › Engine / Hybrid System › B58 (EMISSION CONTROL) › FUEL EMISSION TUBE (for Center)
RM3650E _51 Engine / Hybrid System _080101 B58 EMISSION CONTROL _0394171 FUEL EMISSION TUBE(for Center) A

B58 EMISSION CONTROL  FUEL EMISSION TUBE(for Center)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Working on fuel system.

Risk of fire! Danger of explosion!

-

When working on the fuel system, make sure that the workbay is sufficiently ventilated, e.g. using extraction unit.

-

Tightly seal off open lines and connections; collect any escaping fuel directly at the point of exit.

-

No fire, sparks, open flames or smoking.


·

Contact with hazardous fluids.

Hazardous to health!

-

Note and follow safety information on containers.

-

Conduct all work in appropriate personal protective equipment only.




PROCEDURE

Hide 58166A 1.REMOVE FRONT FLOOR COVER LH

Hide 77255 3.REMOVE NO. 2 FUEL EMISSION TUBE

a.
A446786

Unlock and disconnect snap fastener (1).


b.

Unlock and disconnect snap fastener (2).


c.

Unclip No. 2 fuel emission tube (3) from the brackets (4) and remove.