Home › Engine / Hybrid System › B48 (EMISSION CONTROL) › FUEL TANK VENTILATION HOSE
RM3650E _51 Engine / Hybrid System _080100 B48 EMISSION CONTROL _0400411 FUEL TANK VENTILATION HOSE A

B48 EMISSION CONTROL  FUEL TANK VENTILATION HOSE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




PROCEDURE

Hide 12601B 1.REMOVE NO.1 ENGINE COVER SUB-ASSEMBLY

Hide 17880 3.REMOVE AIR CLEANER HOSE ASSEMBLY

Hide 4.REMOVE TANK VENTILATION LINE

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A449874

Unlock and disconnect the tank ventilation lines (1).


b.

Unlock plug connection (2) and disconnect.


c.

Guide the tank ventilation line (1) out of the holder (3) and remove.