The "Vehicle Check" below contains the Supra-specific inspection and maintenance items as specified by the manufacturer.
1. Check horn, headlight flashers and hazard warning flashers
Operate the horn and check the function of both horns.
Operate the headlight flasher, check the function of the high beam headlight and blue indicator light in the combination meter.
Check the function of the hazard warning lights.
2. Check interior lighting
Check the function of the operating switches.
Check the function of the indicator lights and warning lights.
Check the function of additional instrument lights.
Check the function of the illumination of the light switches.
If applicable, check the function of additional illumination.
Check the function of the interior lights.
Check the function of the glove box light.
Check the function of the luggage compartment light.
3. Check blower
Check the function of the blower.
Check the air distribution and air outlets for all blower speeds.
4. Check lighting system
Check the headlight function.
Check the taillight function.
Check the number plate light function.
Check the headlight adjustment.
One or more lighting system functions are not working correctly.
Repair the lighting system.
If necessary, adjust the headlights.
5. Check seat belts
Check the condition of the seat belts.
Check the function of the retractors.
Check the seat belt locks, seat belt buckles and seat belt retainer for damage.
Damage or functional limitations.
Repair damage and functional limitations.
6. Check wiper and window washer system
Check the wiper range for streaks.
Streaks in the wiper range.
Replace the wiper blades.
Check the washer nozzles and spray jet.
The spray jet does not exit or exits unevenly.
Adjust the washer nozzles.
If necessary, replace the washer nozzles.
7. Check tire settings in multi-display (Central Information Display (CID))
Check for correct tire setting in the multi-display.
The mounted tires match the tire setting in the multi-display.
Incorrect tire setting in the multi-display.
Change the tire settings in the multi-display and initialize the tire pressure warning system.
Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>INITIALIZATION
8. Check tires (If necessary, emergency wheel)
Check the tread depth of all tires with the tire tread gauge.
Check the tire tread surface and flanks for cuts and foreign objects, such as nails or screws.
Check tread wear pattern for worn out areas and for one-sided wear.
Any tire is worn or damaged.
If necessary, replace the tire and adjust the wheel alignment.
Check the tire pressure.
The tire pressure is too low or too high.
Adjust the tire pressure.
9. Check puncture repair kit (mobility set)
Check the expiry date on the repair sealant bottle.
Product has expired.
Product will expire prior to the next vehicle check.
Replace the repair sealant bottle.
10. Check warning triangle, high-visibility jacket and first-aid kit
Check whether or not the warning triangle, high-visibility jacket and first-aid kit are available.
Check the expiry date on the first-aid kit.
Warning triangle, high-visibility jacket or first-aid kit not present.
First-aid kit has expired.
First-aid kit will expire prior to the next vehicle check.
Install the warning triangle, high-visibility jacket and first-aid kit.
Replace the first-aid kit.
11. Check washer fluid for window washer system
Top up the fluid tank for the window washer system up to the maximum mark.
12. Check coolant level and coolant composition
Check the connections, hose clamps and hoses for coolant residues and damage such as e.g. cracks.
Check the coolant concentration in both reservoir tanks.
50 %
Check the coolant level in both reservoir tanks.
The filling level in the reservoir tank must be between the minimum and maximum mark.
Coolant level below the minimum mark.
Coolant level above the maximum mark.
Adjust filling level in the reservoir tank to the desired filling level.
13. Check brake lines and brake line connections
Visually check the following items.
Check for brake fluid leaks.
Check for traces of brake fluid leakage.
Check for brake line damage.
Check for pinched areas.
Check for correct routing of the brake lines.
Check for correct seating of the brake lines in the holders.
Check the brake fluid level in the reservoir tank.
Leaks or damage on the brake lines.
Repair detected defects.
14. Check vehicle underbody and all other visible components
Visually check the vehicle underbody.
Check for leaks (transmission, differential, exhaust system, fuel system, brake components and steering).
Check the exhaust pipe support for correct installation and damage.
Check for correct routing of the electrical lines (e.g. brake pad wear sensor).
Check the shock absorbers for correct installation.
Check the dust boots for damage.
Check the springs for correct installation and damage.
Check the vehicle underbody for damage.
Check for complete mounting of the mounted parts (e.g. under cover).
Leaks or damage on the vehicle underbody.
Repair detected defects.
15. Check steering components
Move the steering wheel in both directions while checking for play.
There is no play present between the tie rod end and the tie rod.
There is play.
Repair the steering components.
Check the rack boots and dust boots for damage (e.g. cracks and holes).
Check the rack boots for missing clamps.
Leaks or damage on the steering components.
Repair detected defects.
16. Check road safety and performing a test drive
Check the foot brake and the parking brake.
Check the steering for play, ease of movement and correct straight-ahead driving.
Check the shock absorbers visually for leaks.
Check that the indicator lights and warning lights illuminate and function correctly.
Defects were detected.
Repair detected defects.
17. Perform CBS reset
After completing the vehicle check, reset the Condition Based Service (CBS) "Vehicle Check" item.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>CONDITION BASED SERVICE (CBS)