Home › Engine / Hybrid System › B58 (EMISSION CONTROL) › CANISTER (for No. 2)
RM3650E _51 Engine / Hybrid System _080101 B58 EMISSION CONTROL _0459871 CANISTER(for No. 2) A

B58 EMISSION CONTROL  CANISTER(for No. 2)  REMOVAL  


PROCEDURE

Hide 1.REMOVE WHEEL ASSEMBLY

Hide 65637 2.REMOVE REAR WHEEL HOUSE LINER RH

Hide 23300J 3.REMOVE NO. 2 CHARCOAL CANISTER ASSEMBLY

a.
A442273

Detach the tank ventilation line from the bracket (1).


b.

Unlock the snap fastener (2) and disconnect the tank ventilation line.


c.
A442274

Release the screw (1) and counter on the nut (2).


d.

Remove the No. 2 charcoal canister assembly (3).