Home › Engine / Hybrid System › B58 (EMISSION CONTROL) › CANISTER (for No. 2)
RM3650E _51 Engine / Hybrid System _080101 B58 EMISSION CONTROL _0459871 CANISTER(for No. 2) A

B58 EMISSION CONTROL  CANISTER(for No. 2)  INSTALLATION  


PROCEDURE

Hide 23300J 1.INSTALL NO. 2 CHARCOAL CANISTER ASSEMBLY

a.
A442274

Install the No. 2 charcoal canister assembly (3).


b.

Tighten the screw (1) and counter on the nut (2).

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Connect and lock the snap fastener (2) of the tank ventilation line.

HINT:

The snap fastener (2) must engage audibly and noticeably.



d.
A442273

The snap fastener (2) must engage audibly and noticeably.


Hide 65637 2.INSTALL REAR WHEEL HOUSE LINER RH

Hide 3.INSTALL WHEEL ASSEMBLY