Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CURTAIN SHIELD AIRBAG ASSEMBLY

CURTAIN SHIELD AIRBAG ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY


  1. Install the curtain shield assembly with the 10 bolts and clip in the order shown in the illustration.


    F051334E01

    Torque:
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }

    NOTICE:
    Do not twist the curtain shield airbag assembly.

  1. Connect the connector to the curtain shield airbag assembly.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



2. INSTALL ROOF HEADLINING ASSEMBLY

HINT:
Double Cab (Click here)



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }



4. INSPECT SRS WARNING LIGHT
(Click here)