Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P0500    Vehicle Speed Sensor Circuit Malfunction

DTC    P0503    Vehicle Speed Sensor Circuit Malfunction

for Preparation Click here


DESCRIPTION

1GR-FE: (Click here)
2TR-FE: (Click here)

DTC No.
DTC Detection Conditions
Trouble Areas
P0500
This trouble code is output when the vehicle speed signal from the vehicle speed sensor is cut for 0.14 seconds or more while the cruise control is in operation.
  1. Combination meter assembly
  2. Vehicle speed sensor
  3. Vehicle speed sensor signal circuit
  4. ECM
P0503
Momentary interruption and noise are detected when a rapid change of vehicle speed occurs while the cruise control is in operation.
  1. Combination meter assembly
  2. Vehicle speed sensor
  3. Vehicle speed sensor signal circuit
  4. ECM

WIRING DIAGRAM

1GR-FE: (Click here)
2TR-FE: (Click here)

INSPECTION PROCEDURE

1GR-FE: (Click here)
2TR-FE: (Click here)