Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1203/53    ECM Communication Circuit Malfunction

for Preparation Click here


DESCRIPTION

The circuit sends TRAC, A-TRAC and VSC control information from the skid control ECU to the ECM, and engine control information from the ECM to the skid control ECU via the CAN communication system.

DTC No.
DTC Detecting Condition
Trouble Areas
C1203/53
Information relating to engine drive source or destination stored in ECM does not match that stored in skid control ECU.
  1. CAN communication system
  2. ECM

WIRING DIAGRAM


C124767E02


INSPECTION PROCEDURE

1.CHECK DTC (ENGINE CONTROL SYSTEM)
  1. Check if any DTC is recorded for the engine control system (Click here or Click here).

    Result
    Proceed to
    DTC not output
    A
    DTC output
    B



B
REPAIR ENGINE CONTROL SYSTEM
A

REPLACE ECM