Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Regular Cab and Double Cab)

AUDIO AND VISUAL SYSTEM (for Regular Cab and Double Cab) > CD cannot be Inserted / Played or CD is Ejected Right After Insertion

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK IF A PROPER CD IS INSERTED
  1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.

    OK:
    Normal CD.

    HINT:
    1. Translucent or uniquely-shaped CDs cannot be played.
    2. CDs with adhesive paper labels should not be played.
    3. Commercial audio CDs can be played.
    4. CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
    5. MP3 and WMA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
    6. For details on playable CDs, refer to the Owner's Manual.



NG
CHANGE DISC
OK


2.CHECK THAT CD IS INSERTED PROPERLY
  1. Check whether or not the CD is inserted upside down.

    OK:
    CD is properly inserted.



NG
INSERT CD PROPERLY
OK


3.CHECK CD


    I100151
  1. Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.

    OK:
    Malfunction disappears.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.



NG
Go to step 4
OK

END 

4.REPLACE CD WITH ANOTHER AND RECHECK
  1. Replace the CD with a normal one and check that the malfunction disappears.

    OK:
    Malfunction disappears.

    Result: 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE RADIO RECEIVER (Click here)

C
REPLACE RADIO RECEIVER (Click here)
A

END