Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for CrewMax)

AUDIO AND VISUAL SYSTEM (for CrewMax) > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CD


    I100151
  1. Check the CD.

    OK:
    The CD is clean.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.



NG
CLEAN CD
OK


2.CHECK CD


    I100152
  1. Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD.



NG
CHANGE DISC
OK


3.CHECK OPERATION USING ANOTHER CD
  1. Check if the problem recurs using another CD.

    OK:
    The problem does not occur.



NG
Go to step 4
OK

END 

4.CHECK RADIO RECEIVER
  1. Check that the radio receiver is properly installed.

    OK:
    Radio receiver is properly installed.

    Result: 
    Result
    Proceed to
    NG
    A
    OK (for Column Shift Type)
    B
    OK (for Floor Shift Type)
    C



B
REPLACE RADIO RECEIVER (Click here)

C
REPLACE RADIO RECEIVER (Click here)
A

REINSTALL RADIO RECEIVER PROPERLY