Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for Double Cab)

DTC    58-40    GPS Antenna Error

DTC    58-41    GPS Antenna Power Source Error

DTC    80-40    GPS Antenna Error

DTC    80-41    GPS Antenna Power Source Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
58-40
Navigation antenna error
  1. Harness and connector
  1. Navigation antenna
  1. Navigation receiver
58-41
Error of power source to navigation antenna
80-40
Navigation antenna error
80-41
Error of power source to navigation antenna

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK HARNESS AND CONNECTOR (NAVIGATION ANTENNA - NAVIGATION RECEIVER)
  1. Check that the navigation antenna cord is securely connected to the navigation receiver.

    OK:
    The cord is securely connected.



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2.REPLACE NAVIGATION ANTENNA
  1. Replace the navigation antenna with a normal one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Same problem does not occur.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE NAVIGATION RECEIVER (Click here)

C
REPLACE NAVIGATION RECEIVER (Click here)
A

END