Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for CrewMax)

DTC    58-42    Map Disc Read Error

DTC    80-42    Map Disc Read Error

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
58-42
When one of following conditions is met:
  1. Player error
  2. Scratches or dirt on disc
  3. Access to invalid address due to software error
  1. Map disc
  2. Navigation receiver
80-42

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK MAP DISC


    I100152
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
Go to step 4
OK


2.DISC CLEANING


    I100201
  1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.DTC CLEAR AND RECHECK
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Same problem does not occur.



NG
Go to step 4
OK

DISC WAS DIRTY 

4.REPLACE MAP DISC
  1. Replace the map disc.

  1. Clear the DTCs and recheck for DTCs.

  1. Check if the same trouble occurs again.

    OK:
    Same problem does not occur.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE NAVIGATION RECEIVER (Click here)

C
REPLACE NAVIGATION RECEIVER (Click here)
A

DISC IS FAULTY