ENGINE > GENERAL MAINTENANCE |
| 1. REPLACE TIMING BELT |
| Type | See procedures |
| 2UZ-FE | Click here
|
| 2. INSPECT DRIVE BELT |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 3UR-FE | Click here
|
| 3UR-FBE | Click here
|
| 3. REPLACE SPARK PLUGS |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 3UR-FE | Click here
|
| 3UR-FBE | Click here
|
| 4. REPLACE ENGINE OIL AND OIL FILTER |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 3UR-FE | Click here
|
| 3UR-FBE | Click here
|
| 5. REPLACE ENGINE COOLANT |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 3UR-FE | Click here
|
| 3UR-FBE | Click here
|
| 6. INSPECT EXHAUST PIPES AND MOUNTINGS |
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
| 7. INSPECT AIR CLEANER FILTER |
Remove the air cleaner filter.
Visually check that the air cleaner filter is not excessively damaged or oily.
Replace the air cleaner filter with a new one, if necessary.
| 8. INSPECT FUEL TANK CAP GASKET |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 3UR-FE | Click here
|
| 3UR-FBE | Click here
|
| 9. INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND |
Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.
| 10. INSPECT VALVE CLEARANCE |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|