DTC 63-41 Wrong Disc |
DTC 63-42 Disc cannot be Read |
| DTC Code | DTC Detection Condition | Trouble Area |
| 63-41 | Unsuitable disc is inserted. |
|
| 63-42 | Disc cannot be read. |
| 1.CHECK DISC |
![]() |
Check that the disc is not deformed or cracked.
|
| ||||
| OK | |
| 2.DISC CLEANING |
![]() |
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
| NEXT | |
| 3.CLEAR DTC |
Clear the DTCs (Click here).
| NEXT | |
| 4.RECHECK DTC |
Recheck for DTCs and check if the same trouble occurs again.
|
| ||||
| OK | ||
| ||
| 5.REPLACE DISC WITH ANOTHER AND RECHECK |
Replace the disc with a normal one.
Clear the DTCs (Click here).
Recheck for DTCs and check if the same trouble occurs again.
| Result | Proceed to |
| OK | A |
| NG (for Column Shift Type) | B |
| NG (for Floor Shift Type) | C |
|
| ||||
|
| ||||
| A | ||
| ||