Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for CrewMax)

DTC    63-46    Scratched / Reversed Disc

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
63-46
Scratches or dirt is found on CD surface or CD is inserted upside down.
  1. CD
  2. Navigation receiver

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK THAT CD IS INSERTED PROPERLY
  1. Check that the CD is not inserted upside down.

    OK:
    CD is properly inserted.



NG
INSERT CD PROPERLY
OK


2.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformations or cracks on the disc.



NG
CHANGE DISC
OK


3.DISC CLEANING


    I100151
  1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.


NEXT


4.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


5.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 6
OK

DISC WAS DIRTY 

6.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with a normal one.

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE NAVIGATION RECEIVER (Click here)

C
REPLACE NAVIGATION RECEIVER (Click here)
A

DISC IS FAULTY