Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for CrewMax)

DTC    63-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
63-78
Error occurs during the decode process (MP3 / WMA).
Navigation receiver

INSPECTION PROCEDURE

HINT:
After the inspection completed, clear the DTCs (Click here).

NOTICE:
  1. This code may be output even if there is no malfunction.
  2. If this code is output frequently, replace the navigation receiver.

1.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE NAVIGATION RECEIVER (Click here)

C
REPLACE NAVIGATION RECEIVER (Click here)
A

END (THIS CODE MAY BE OUTPUT EVEN IF THERE IS NO MALFUNCTION)