Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Regular Cab and Double Cab)

DTC    62-78    DSP Error

DTC    63-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
62-78
An error occurs during the decode process (MP3/WMA).
Radio receiver
63-78
An error occurs during the decode process (MP3/WMA).

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

NOTICE:
  1. These codes may be output even if there is no malfunction.
  2. If these codes are output frequently, replace the radio receiver for Column shift type (Click here) or Floor shift type (Click here).

1.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.

    Result: 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE RADIO RECEIVER (Click here)

C
REPLACE RADIO RECEIVER (Click here)
A

END