STARTER (for 1.4 kW Type) > INSTALLATION |
| 1. INSTALL STARTER ASSEMBLY |
![]() |
Connect the starter wire with the nut.
Connect the starter connector.
Connect the starter to the cylinder block.
Connect the ground wire with the bolt.
Install the engine wire protector to the starter with the bolt.
![]() |
Install the starter with the 2 bolts.
| 2. INSTALL AIR PUMP ASSEMBLY |
![]() |
Install the air pump with the 2 bolts and 2 nuts.
Connect the air pump connector.
| 3. INSTALL NO. 4 AIR INJECTION SYSTEM HOSE |
| 4. INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY |
Install a new O-ring to the water by-pass pipe.
Apply soapy water to the O-ring.
![]() |
Push in the water by-pass pipe.
Connect the water by-pass pipe with the bolt.
Connect the connector clamp.
| 5. INSTALL INTAKE MANIFOLD ASSEMBLY |
Install the intake manifold (Click here).
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |