Home › ENGINE ยท 2UZ-FE › ENGINE CONTROL SYSTEM › VVT SENSOR

VVT SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL VVT SENSOR


    A159539
  1. Install the 2 sensors with the 2 bolt.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the 2 sensor connectors.



2. INSTALL INTAKE MANIFOLD ASSEMBLY
  1. Install the intake manifold (Click here).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Some systems need to be initialized after the cable is reconnected (Click here).