Home › RESTRAINTS › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat)

FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Remove the front seat (Click here).



2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
  1. Remove the front seat (Click here).



3. REMOVE CENTER FRONT SEAT ASSEMBLY
  1. Remove the front seat .



4. REMOVE CENTER SEAT CUSHION SHIELD LH


B165567
  1. Using a T30 "TORX" socket, remove the bolt.

  1. Detach the 7 claws and 2 clips, and remove the cushion shield.



5. REMOVE CENTER SEAT CUSHION SHIELD RH


B165568
  1. Using a T30 "TORX" socket, remove the bolt.

  1. Detach the 7 claws and 3 clips, and remove the cushion shield.



6. DISCONNECT CENTER FRONT SEAT BELT ASSEMBLY RH


B165812
  1. Remove the bolt and seat belt anchor.



7. REMOVE CENTER SEATBACK ASSEMBLY


    B165574
  1. Remove the 2 wire harness clamps from the center seatback frame.



    B165575
  1. LH Side:
    Using a T40 "TORX" socket, remove the 2 bolts.

  1. RH Side:
    Using a T55 "TORX" socket, remove the 2 bolts.

  1. Remove the center seatback.



8. REMOVE FRONT SEAT HEADREST ASSEMBLY


9. REMOVE FRONT SEAT SHOULDER BELT COVER


B165580
  1. Using a T10 "TORX" socket, remove the 2 screws and shoulder belt cover.



10. REMOVE UPPER REAR SEATBACK LOCK BEZEL


B165581
  1. Detach the 4 claws and remove the lock bezel.

  1. Disconnect the seat belt from the shoulder belt cover.



11. REMOVE LOWER FRONT SEAT SHOULDER BELT COVER


B165582
  1. Using a T30 "TORX" socket, remove the 2 bolts and shoulder belt cover.



12. REMOVE RECLINING REMOTE CONTROL BEZEL


B165583
  1. Detach the 2 clips and claw, and then remove the bezel.



13. REMOVE FRONT SEAT TRAY


B165584
  1. Detach the 5 clips and remove the tray.



14. REMOVE CENTER FRONT SEAT ARMREST COVER


B165585
  1. Remove the 2 screws and armrest cover.



15. REMOVE SEAT FASTENER COVER


B165586
  1. Using a screwdriver, detach the 6 claws and remove the 2 covers.

    HINT:
    Tape the screwdriver tip before use.



16. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


    B165587
  1. Remove the 6 screws.



    B165588
  1. Detach the 21 claws and remove the screw.



    B165592
  1. LH Side:
    Disconnect the cable from the center seatback frame inner side.



    B165591
  1. RH Side:
    Disconnect the cable from the center seatback frame inner side.



17. REMOVE FRONT SEAT HEADREST SUPPORT


B165593
  1. Detach the 4 claws and remove the 2 headrest supports.



18. REMOVE CENTER FRONT SEAT BELT ASSEMBLY RH


B165813
  1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.