Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
Perform these procedures only when replacing the high mounted stop light assembly.



1. REMOVE ROOF HEADLINING ASSEMBLY
  1. for Regular Cab:
    Remove the headlining (Click here).

  1. for Double Cab:
    Remove the headlining (Click here).



2. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY


    E142777
  1. Remove the 2 nuts.

  1. Disconnect the connectors and clamp, and remove the stop light.



3. REMOVE HIGH MOUNTED STOP LIGHT GASKET
  1. Remove the gasket.