Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for SD)

NAVIGATION SYSTEM (for SD) > Route cannot be Calculated

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK SD CARD
  1. Check that the SD card is not deformed or cracked.

    OK:
    No deformations or cracks in the SD card.



NG
REPLACE SD CARD
OK


2.SET DESTINATION
  1. Set another destination and check if the system can calculate the route correctly.

    OK:
    Route can be correctly calculated.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)

C
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
A

END