Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Vehicle Position Mark is not Updated

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK MAP DISC


    I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks in the map disc



NG
REPLACE MAP DISC
OK


2.CHECK NAVIGATION DISPLAY
  1. Check if touch scrolling can be performed on the map display.

    OK:
    Touch scroll can be performed.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK


3.CHECK VEHICLE SENSOR


    E176549
  1. Enter the "Function Check/Setting" mode and select "GPS & Vehicle Sensors" (Click here).

  1. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are equal or almost equal.

    OK:
    The readings are equal or almost equal.



NG
CHECK DTC OUTPUT (Click here)
OK

END