Home › ENGINE ยท 1GR-FE › STARTING › STARTER (for 1.6 kW Type)

STARTER (for 1.6 kW Type) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnecting (Click here).



3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH
(Click here)


4. REMOVE STARTER ASSEMBLY


    A238057
  1. Remove the bolt and disconnect the ground wire.

  1. Disconnect the starter connector.

  1. Remove the terminal cap.

  1. Remove the nut and disconnect the starter wire.



    A238113
  1. Remove the 2 bolts and starter.



5. REMOVE FLYWHEEL HOUSING SIDE COVER


A222907